Installation Guide
Step-by-Step Installation Process
This guide outlines the proper installation procedures for the CURATRACK Curtain Track System, ensuring a secure, efficient, and long-lasting setup.
Layout Planning & Measurement
Measure the room dimensions and mark the track path on the ceiling according to the floor plan.
Mounting the Wall Brackets
Secure the LEX-TS Wall Bracket to the wall at the starting point. High strength bearing up to 100KG.
Installing the Suspension Rods
Install the LEX-TS Adjustable Suspension Rods to the ceiling at intervals to support 50KG per rod.
Track Assembly & Connection
Insert the LEX-TS Cubicle Track into the brackets. Use connectors to join track sections.
Inserting Rollers & End Caps
Slide the LEX-TS 360° Rollers into the track. Secure ends with a LEX-TS End Cap.
Final Stability Check
Verify all connections are tightened and track is level. Test curtain movement for smooth glide.
HANGING CURTAIN TRACK AT CEILING SURFACE
Setting Out
Identify and mark the exact track alignment on the ceiling based on approved layout drawings. Ensure positioning allows full curtain movement and adequate clearance from walls and obstacles.
Fixing of Ceiling Brackets
Mark the bracket level using a laser level or levelling instrument. Drill holes into the structural ceiling slab. Insert suitable anchors (expansion bolts or approved fasteners) and secure the bracket tightly to ensure stability.
Track Installation
Lift and position the curtain track onto the installed brackets. Secure the track using screws or clip-in locking mechanism provided. For multiple track sections, align properly and connect using joint connectors. Ensure track is straight, level, and firmly fixed.
Installation of Accessories
Insert curtain carriers/rollers into the track channel. Install end caps at both ends of the track. Fix curtain hooks to carriers.
Final Stability Check
Check all brackets, fasteners, and connections are secure. Confirm system stability and alignment.